Description
one-component, waterproof and paintable seal material for horizontal and vertical surfaces
suitable for different areas, such as roofs, walls, wet cells, vehicles
for vehicles as underbody protection and as a spreadable joint sealing
waterproofing for roof lights, skylights, gutters, pipe junctions, wall connections, chimney connections, outdoor ventilation, cracks and fractures in masonry, etc.
suitable for substrates such as Styrofoam®, plastics, concrete, wood, stone, metal, sanded roofing felts
UV resistant and not sensitive to rain and spray water (even during curing)
adheres to old and wet surfaces
outstanding resistance to chemicals
no subsequent stickiness on the surface
excellent workability, only 2 coats are necessary
colour: grey
consistency: low-viscosity, pasty
viscosity PP25, 11/s: 10 - 30 Pa.s
hardens at room temperature
spec. weight: 1.4 g/cm3
skin formation 23 °C / 50% rel. humidity: 20 - 40 minutes
hardening time: approx. 3 hours (1 mm layer thickness)
processing temperature of: +5 °C to +40 °C
temperature resistance of: -40 °C to +90 °C (when hardened)
water vapour permeable
consumption
approx. 1.3 kg/m² at approx. 1mm application thickness
approx. 2.1 kg/m² at approx. 2mm application thickness with fleece
Technical data
Gross weight 520 g