Šlifavimo plokštė skersmuo: 58; 70 mm
Gręžimo skersmuo:
- 3 - 10 mm (58 mm plokštė)
- 8 - 16 mm (70 mm plokštė)
APEX kampas 118 laipsnių
Galia [W] 70
Greitis [1 / min] 1600
Skersmuo [mm] 3-16

Diameter of sanding plate: 58 mm; 70 mm
Drill diameter:
- 3 mm - 10 mm (plate 58 mm)
- 8 mm - 16 mm (plate 70 mm)
The apex angle of the drill: 118 degrees

Product description
The sharpener is designed for sharpening all-steel drills (high speed HSS, cobalt, carbide) drill bits for metal.

The sharpener enables sharpening of the drill bits from 3mm to 16mm

The adapter supports drill bits of the following diameters:
3mm / 3.5mm / 4mm / 4,2mm / 4,5mm / 5mm / 5,5mm / 6mm / 6,5mm / 7mm / 7,5mm / 7,5mm / 8mm / 8.5mm / 8.5mm / 9mm / 9.5mm / 10mm

Additional adapter supports drill bits of diameters:
8mm / 8.8mm / 9.5mm / 10.3 / 11.1mm / 12mm / 12.7mm / 13.5mm / 14.3mm / 15.1mm / 16mm

Such a wide range of sizes allows for the sharpening of the most frequently used drill bits.

With a simple operation, the blade allows sharpening of the drill in just a few seconds, while ensuring high repeatability. The cutting edge thus obtained maximizes the performance of the drill.

TECHNICAL DATA:

Power: 250 W
Power supply: 230 V ~ 50 Hz
Rotational speed: 1600 rpm
Operating diameters: 3 - 16 mm